A2-1

Cutting attachment guard 
 
This guard is intended to prevent loose objects from being
thrown towards the operator. The guard also protects the
operator from accidental contact with the cutting attachment.
 
 
  WARNING! Never use a cutting attachment
without an approved guard. See the chapter
on Technical data. If an incorrect or faulty
guard is fitted this can cause serious
personal injury.
 
 
Cutting equipment
 
Saw blades are intended for cutting fibrous types of wood.
 
 
Grass blades and grass cutters are intended for cutting
coarse grass.
 
 
 A trimmer head is intended for trimming grass.
 
  
 
 
Locking nut
 
A locking nut is used to secure some types of cutting
attachment.
 
 
 
Checking, maintaining and servicing
the machine's safety equipment
 
IMPORTANT!

All servicing and repair work on the machine requires
special training. This is especially true of the machine's
safety equipment. If your machine fails any of the checks
described below you must contact your service agent.
When you buy any of our products we guarantee the
availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.
 
Throttle lock
 
• Make sure the throttle control is locked at the idle setting
when the throttle lock is released.
 
 
• Press the throttle lock and make sure it returns to its
original position when you release it.
 
 
 
• Check that the throttle control and throttle lock move freely
and that the return springs work properly.
 
 
 
• The throttle lock is designed to prevent accidental
operation of the throttle control. When you press the lock
(A) (i.e. when you grasp the handle) it releases the throttle
control (B). When you release the handle the throttle
control and the throttle lock both move back to their
original positions. This movement is controlled by two
independent return springs. This arrangement means that
the throttle control is automatically locked at the idle
setting.
 
 
 
子網頁 (1): A2-2